HP ProDesk 405 G2 - Technical Specs: Storage - Opal2 & Opal1 SSDs; 128 GB 2.5 Opal2 SED SSD; 120 GB 2.5 Opal1 SED SSD

128GB* SATA 2.5" Opal2 SED Solid State Drive
Unformatted Capacity 128 GB
250,069,680 (User Addressable Sectors)
Architecture Self-Encrypting (SED) Solid State Drive with NAND Flash and SATA interface.
Trusted Computing Group(TCG) OPAL compliant encrypted solid state drive
Interface Serial ATA (6.0 Gb/s)
Form Factor 2.5 inch
Height 6.80 mm ± 0.20
Width 69.85 mm ± 0.25
Length 100.20 mm ± 0.25
Weight Up to 55 g
Bandwidth Performance Sustained Sequential Read: Up to 520 MB/s
Sustained Sequential Write: Up to 340 MB/s
Power Power consumption: Active: 0.78A / 3.891W; Idle: 0.005A / 0.026W
Mean Time Between Failure
(MTBF)
1,500,000 hours
Environmental
(all conditions, non-condensing)
Operating Temperature: 32° to 158° F (0° to 70° C)
Relative Humidity: 5% to 95%
Shock: 1,500 G/0.5 ms
120GB* SATA 2.5" Opal1 SED Solid State Drive
Unformatted Capacity 234,442,648 Unformatted Capacity (Total User Addressable Sectors in LBA mode)
Architecture Self-Encrypting (SED) Solid State Drive with 20nm MLC NAND Flash and SATA interface
Interface Serial ATA (6.0 Gb/s)
NAND Flash 20nm MLC NAND Flash
Form Factor 2.5 inch
Thickness 7 mm
Weight Up to 78 g
Bandwidth Performance Sustained Sequential Read: Up to 540 MB/s
Sustained Sequential Write: Up to 480 MB/s
Random 4k Read: Up to 41K IOPs
Random 4k Write: Up to 80K IOPs
Power Power consumption: 195 mW (active average); 125 mW (idle average
Mean Time Between Failure
(MTBF)
1,200,000 hours
Environmental
(all conditions, non-condensing)
Operating Temperature: 32° to 158° F (0° to 70° C)
Relative Humidity: 5% to 95%
Shock: 1,500 G/0.5 ms
QuickSpecs
HP ProDesk 405 G2 Microtower Business PC
Technical Specifications - Hard Disk and Solid State Storage
DA - 14983 North America — Version 1 — May 28, 2014 Page 30