EL-MF877-00 Page 11
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at EL-MF877-01
Step39 Use PH1 screwdriver to remove FG screw
Step40 Disconnect fan connector and inlet connector
Step41 Loose screws and remove PCA from case
Step42 Use PH1 screwdriver to remove AC inlet & Fan screw
Step43 Heat the solder of the Electrolytic Capacitors of
greater than 2.5cm in diameter or height and Remove it
To Previous Page
Loading...
