HP BL460c Gen8 Intel® Xeon® E5-2665 (2.4GHz/8-core/20MB/115W) Processor Kit
667803-B21
HP BL460c Gen8 Intel® Xeon® E5-2660 (2.2GHz/8-core/20MB/95W) Processor Kit
662065-B21
HP BL460c Gen8 Intel® Xeon® E5-2650 (2.0GHz/8-core/20MB/95W) Processor Kit
662066-B21
HP BL460c Gen8 Intel® Xeon® E5-2650L (1.8GHz/8-core/20MB/70W) Processor Kit
662078-B21
HP BL460c Gen8 Intel® Xeon® E5-2643 (3.3GHz/4-core/10MB/130W) Processor Kit
662072-B21
HP BL460c Gen8 Intel® Xeon® E5-2640 (2.5GHz/6-core/15MB/95W) Processor Kit
662067-B21
HP BL460c Gen8 Intel® Xeon® E5-2637 (3.0GHz/2-core/5MB/80W) Processor Kit
662077-B21
HP BL460c Gen8 Intel® Xeon® E5-2630 (2.3GHz/6-core/15MB/95W) Processor Kit
662068-B21
HP BL460c Gen8 Intel® Xeon® E5-2630L (2.0GHz/6-core/15MB/60W) Processor Kit
662079-B21
HP BL460c Gen8 Intel® Xeon® E5-2620 (2.0GHz/6-core/15MB/95W) Processor Kit
662069-B21
HP BL460c Gen8 Intel® Xeon® E5-2609 (2.4GHz/4-core/10MB/80W) Processor Kit
662070-B21
HP BL460c Gen8 Intel® Xeon® E5-2603 (1.8GHz/4-core/10MB/80W) Processor Kit
667805-B21
NOTE:
The Intel Xeon E5-2600 Processor Family cannot be configured with the new
1866MHz HP Smart Memory or the new 1600MHz Low Voltage (1.35v) HP Smart
Memory.
NOTE:
DIMM slots 4 and 5 are not accessible when either the E5-2690, the E5-2643, the
E5-2643 v2, the E5-2637 v2, or the E5-2667 v2 is used. In a 2 processor configuration,
there are twelve (12) total available DIMM slots
NOTE:
For the maximum supported memory speeds for each processor listed above,
please reference the 'Memory Speed by Processor Model' table in the Memory section
of the QuickSpecs.
NOTE:
HT indicates that the processor model supports Intel® Hyper-Threading
Technology.
NOTE:
Turbo indicates the maximum potential frequency increment when using Intel®
Turbo Boost Technology, with 8, 7, 6, 5, 4, 3, 2 or 1 core(s) active.
NOTE:
DDR3 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed.
NOTE:
Up to 2 processors supported. Mixing different processor models is not
supported.
NOTE:
For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model
number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6
is socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs.
NOTE:
The BL460c Gen8 supports one or two processors.
NOTE:
The BL460c Gen8 includes two I/O mezzanine expansion slots. A processor must
be installed in processor slot 1 for access to the first mezzanine expansion slot
(expansion slot 1). A processor must be installed in processor slot 2 for access to the
second mezzanine expansion slot (expansion slot 2).
NOTE:
All processors within the server must be identical.
NOTE:
All processors support Intel® Hyper-Threading and Intel® Turbo Boost
Technologies except the E5-2603 and E5-2609.
NOTE:
The letter "L" following the model number indicates denotes lower wattage.
NOTE:
The processor model as well as the memory configuration determines the
maximum speed memory can operate. Please see the see the "Memory" section later in
this document.
NOTE:
The Intel Xeon E5-2620 processor does not support DIMMs at 1.35V. Using the
HP RBSU, 1.35V DIMMs can be changed to operate at 1.5V.
NOTE:
When HP 24GB (1x24GB) Three Rank x4 PC3L-10600R (DDR3-1333) Registered
QuickSpecs
HP ProLiant BL460c Generation 8 (Gen8) Server Blade
Core Options
DA - 14208 North America — Version 31 — December 13, 2013
Page 40
To Next Page
Loading...
