Removal and replacement procedures 38
8.
If the BBWC module is connected to a battery pack, disconnect the battery pack cable from the
connector on the top of the cache module.
CAUTION: To prevent damage to the cache module during installation, be sure the cache
module is fully inserted before pressing down.
To replace the component, reverse the removal procedure.
BBWC battery pack
To remove the component:
1. Back up all data.
2. Close all applications.
3. Power down the server (on page 24).
CAUTION: In systems that use external data storage, be sure that the server is the first unit to be
powered down and the last to be powered back up. Taking this precaution ensures that the system
does not erroneously mark the drives as failed when the server is powered up.
4. Remove the access panel ("Access panel" on page 25).
5. Remove the air baffle ("Air baffle" on page 25).
6. Remove the PCIe riser cage ("PCIe riser cage" on page 26).
To Next Page
Loading...
