To Next PageTo Next Page
Need help?Do you have a question about the HP ProLiant DL120 Gen9 and is the answer not in the manual?
General| Processor Sockets | 1 |
|---|---|
| Maximum Memory | 64 GB |
| Form Factor | 1U Rack |
| CPU Family | Intel Xeon |
| Memory | DDR4 |
| Memory Slots | 4 DIMM slots |
| Storage | Up to 4 LFF or 8 SFF drives |
| RAID Controller | Dynamic Smart Array B140i |
| Networking | 1Gb Ethernet |
| Expansion Slots | PCIe 3.0 |
| Power Supply | 550W |
| Network | 1Gb Ethernet |
Provides step-by-step instructions for powering on the server.
Outlines procedures for safely powering down the server.
Electrical specifications and safety guidelines for server power.
Procedures for proper system grounding to prevent electrical hazards.
Steps for mounting the server into a standard rack.
Procedures for installing the server's operating system.
Step-by-step instructions for installing non-hot-plug drives.
Step-by-step instructions for installing hot-plug drives.
Steps for installing storage controllers and FBWC modules.
Step-by-step instructions for installing a memory module.
Detailed steps for installing the TPM board.
Tool for automated server deployment and configuration.
Comprehensive package for server software and firmware updates.
References to guides and online resources for problem resolution.
Steps for safely removing the system battery.
Steps for installing a new system battery.
Precautions to prevent damage to components from static discharge.
Techniques and equipment for proper grounding to prevent ESD.
Technical data for the server's power supply units.
