Need help?Do you have a question about the HP ProLiant DL140 G2 and is the answer not in the manual?
Provides an overview of the user guide's content and purpose for LO100 features.
Explains HP ProLiant Lights-Out 100's role in basic remote control and system administration.
Lists key remote management capabilities like console redirection, power control, and monitoring.
Details the components included in the remote management card kit for specific server models.
Outlines essential safety and preparatory steps before installing the remote management card.
Step-by-step instructions for physically installing the card in ML110 G3 servers.
Step-by-step instructions for physically installing the card in ML150 G2 servers.
Describes the final steps after physical installation, including reassembly and power-up.
Guides on connecting the LO100 to the network via Ethernet for remote access.
Explains the different user account types (administrator, operator) and their permissions.
Details how to configure and use the server's serial port for LO100 communication.
Describes accessing the LO100 via its Ethernet port using TCP/IP protocols.
Instructions on using the ROMPaq utility to update the LO100 firmware.
Explains the use of SSL for secure, encrypted HTTP communication with the LO100.
Details SSH as a secure method for remote command-line access to the LO100.
Procedure for installing a user-specific security certificate for enhanced LO100 access.
Introduces the Command Line Interface (CLP) for managing the LO100.
Guides on how to establish a connection and log into the LO100 management interface.
Explains how to manage server power states (on/off, reboot) remotely via the LO100.
Describes how to view server sensor data (voltage, fan speed) for health monitoring.
To Next Page
General