HP ProLiant DL140 G3 User Manual

HP ProLiant Lights-Out 100 Remote Management
User Guide
For HP ProLiant ML110 G4, ML115 G1, DL140 G3, DL145 G3, and ML150 G3 Servers
Part Number 419106-008
October 2008 (Eighth Edition)

HP ProLiant DL140 G3 Specifications

General

Brand	HP
Model	ProLiant DL140 G3
Category	Server
Language	English

Summary

Operational overview

Server management

Explains the basic remote control capabilities of the LO100, including IPMI 2.0 and access methods.

Server management features

Details the specific tasks that can be performed using the LO100 for server management.

Configure TCP/IP settings for the LO100 NIC

Explains how to configure network settings for the LO100 network interface.

Control user access

Access LO100 and server controls using a standard browser or new industry-standard SMASH CLP command line interface

Manage the server with IPMI 2.0 compliant applications

Virtual KVM

Installation of the HP Lights-Out 100c Remote Management Card

Preinstallation procedures

Installing the remote management card

Step-by-step instructions for physically installing the remote management card into the server.

Post-installation procedures

Configuration

Configuring network access

Details how to connect the LO100 to the network and obtain an IP address.

Configuring user accounts

Enabling serial access to the LO100

Step-by-step guide to enable serial port communication with the LO100.

Configuring the LO100 serial port

Instructions for configuring the serial port settings for the LO100 within the BIOS.

Using TCP/IP over Ethernet management port

Selecting an Ethernet management port

Obtaining a DHCP IP address from the BIOS Setup Utility

Steps to find the automatically assigned IP address using the BIOS Setup Utility.

Setting up a static IP address from the BIOS Setup Utility

Instructions for manually configuring a static IP address via the BIOS Setup Utility.

Enabling telnet and HTTP services

Updating the firmware

Updating the firmware

Instructions on how to update the LO100 firmware using the ROMPaq utility.

Remotely updating the firmware

Detailed steps for updating the LO100 firmware remotely via TFTP.