HP ProLiant DL160 - G5 Server - Memory

Removal and replacement procedures 61
Figure 41 Installing the air baffle
Memory
HP ProLiant DL160 G5 server has eight DIMM slots that support up to 32 GB maximum system
memory (4GB in each of the eight DIMM slots).
You must adhere to the following guidelines when adding or replacing memory modules:
• For 2P system, both physical processors must be of the same type and speed.
• Use 667 DDR2/4.0 GHz FBD (Fully Buffered DIMM)
• Supported DIMM capacity: 512 MB, 1 GB, 2 GB and 4 GB
• Supported configuration
○ Two DIMMs: Identical model in XMM1 & XMM3
○ Four DIMMs: Identical pair in XMM1/XMM3, and the other identical pair in XMM5/XMM7
○ Eight DIMMs: Identical pair in XMM1/3, XMM5/7, XMM2/4, XMM6/8
Figure 42 DIMM slots