HP ProLiant DL180 G5 User Manual

Front View:
Front View:Front View:
Front View: Rear View:
Rear View:Rear View:
Rear View:
1. Access panel 1. Power Supply Cable Socket
2. Front LED Indicators 2. T-15/T-10 Screwdriver
3. Power on/off 3. Thumbscrew For Top Cover
4. Optional DVD-RW or DVD-ROM drive 4. Low Profile Card Slot
5. Front USB Ports (2) 5. PCI Expansion Card Slot
6. Non-Hot plug Non redundant fans (4 fans) 6. Thumbscrew For PCI Cage
7. Air Baffle 7. HP LO100c Management Card Port (Optional)
8. PCI Cage 8. LAN Port
9. System Board 9. 4 USB 2.0 Ports
10. UID LED Button
11. Serial Port
12. VGA Port
13. PS/2 Mouse Port (green)
14. PS/2 Keyboard Port (purple)
What's New
What's NewWhat's New
What's New
Support for Intel® Xeon® processors: L5420 and L5410
Support for SATA/SAS Hot Plug Enterprise(ENT)/Midline (MDL) Hard Drives
Support for Hot Plug Power Supplies
At A Glance
At A GlanceAt A Glance
At A Glance
The HP ProLiant DL180 G5 is a low cost high capacity storage optimized 2-way server, that delivers on a history of design excellence
and 2U density for a variety of rack deployments and applications.
Processors
ProcessorsProcessors
Processors :
Supports up to two Quad-Core Intel® Xeon® processors: 5400 sequence with 12MB Level 2 cache
Intel® 5100 Chipset
Memory
MemoryMemory
Memory :
Up to 16 GB of memory supported by six (6) PC2-5300 (667 MHz) DDR2 memory slots
Internal Drive Support
Internal Drive SupportInternal Drive Support
Internal Drive Support :
Supports up to twelve via CTO with controller or up to eight via BTO:
Hot Plug Serial ATA (SATA) 3.5"hard drives; or
Hot Plug Serial Attached SCSI (SAS) 3.5"hard drives
QuickSpecs
HP ProLiant DL180 Generation 5 (G5)
HP ProLiant DL180 Generation 5 (G5)HP ProLiant DL180 Generation 5 (G5)
HP ProLiant DL180 Generation 5 (G5)
Overview
DA - 12903 Worldwide — Version 10 — July 14, 2008 Page 1

HP ProLiant DL180 G5 Specifications

General

Processor Sockets	2
Memory Slots	8 DIMM slots
Form Factor	2U Rack
Processor	Intel Xeon 5400 series
Memory	Up to 32GB DDR2
Storage	Up to 8 LFF (3.5-inch) drives
RAID Support	HP Smart Array E200
Network	Embedded NC373i Multifunction Gigabit
Power Supply	Redundant
Operating System Support	Microsoft Windows, Red Hat Linux, SUSE Linux, VMware
Expansion Slots	2 PCI-Express x8, 1 PCI-Express x4

Summary

Standard Features

Network Controller

Mentions integrated NC105i PCI-E Gigabit NIC.

Storage

Lists optical drives and drive bays.

Power Supply

Lists available power supply options (750W, 1200W).

OS Support

Lists supported operating systems and drivers.

Models

Four Drive Serial ATA (SATA) Models

Details specifications for SATA models.

Configuration Information - Factory Integrated Models

Step 1: Base Configuration (choose one of the following configurable models)

Lists base configurations for Hot Plug Models.

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

Details processor options for configuration.

Options

Power Supplies

Details 750W Redundant and 1200W High Efficiency supplies.

Remote Management

Lists Lights-Out 100c Remote Management Card.

Processor

Lists various Intel Xeon processor options with part numbers.

Memory

Lists memory kits with part numbers.

SAS and SCSI Host Bus Adapters

Lists SAS and SCSI Host Bus Adapters.

Smart Array Controllers

Lists Smart Array Controllers (E200, E500, P400, P800).

Tape Drives

Lists USB Tape Drives and SAS Tape Drives.

Disk-Based Backup

Lists RDX and D2D Backup Systems.

Service and Support Offerings (HP Care Pack Services)

Details HP Care Pack services and support levels.

Storage

Hard Drives

Lists SATA and SAS Hot Plug Midline/Enterprise drives.

External Storage

Lists HP StorageWorks MSA enclosures and supported controllers.

Technical Specifications