To Next PageTo Next Page
Need help?Do you have a question about the HP HPE ProLiant DL180 Gen10 and is the answer not in the manual?
General| Processor Sockets | 2 |
|---|---|
| Memory Slots | 16 DIMM slots |
| Expansion Slots | Up to 6 PCIe 3.0 slots |
| Form Factor | 2U Rack |
| Management | HPE iLO 5 |
| Processor | Intel Xeon Scalable processors |
| Storage | Up to 12 LFF or 24 SFF drives |
| RAID Support | HPE Smart Array S100i SR Gen10 |
| Operating System Support | Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware |
| Network Controller | Optional FlexibleLOM or stand-up card |
Parts for which self-repair is mandatory; service costs apply if requested.
Outlines important safety precautions before servicing the server.
Lists critical warnings and cautions for server installation and maintenance.
Explains how to safely power down the server before maintenance.
General procedures for removing and replacing server drives.
Steps to remove and replace the processor and heatsink assembly.
Detailed procedure for removing and replacing the server's system board.
Lists available documents for troubleshooting server problems.
Server deployment and setup tool for OS installation and firmware updates.
