To replace the component, reverse the removal procedure.
Removing and replacing a power supply blank
To replace the component, reverse the removal procedure.
Removing and replacing a hot-plug power supply
CAUTION: All power supplies installed in the server must have the same output power capacity.
Verify that all power supplies have the same part number and label color. The system becomes
unstable and might shut down when it detects different power supplies.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all
bays are populated with either a component or a blank.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the power supply or power
supply blank to cool before touching it.
48 Removal and replacement procedures
To Next Page
Loading...
