HP ProLiant DL180 Generation 6 (G6) User Manual

The HP ProLiant DL180 G6 is a low cost high capacity storage optimized 2-way server that delivers on a history of design excellence
and 2U density for a variety of rack deployments and applications.
Front View: Rear View:
1. Access panel 1. Redundant Power Supply Bay (Optional)
2. Front LED Indicators 2. Power Supply Cable Socket
3. Power on/off 3. Low Profile Card Slot
4. Optional DVD-RW or DVD-ROM drive 4. PCI Expansion Card Slot
5. Front USB Ports (2) 5. PCI Expansion Card Slot
6. Non-Hot Plug Non Redundant fans (4 fans) 6. UID LED Button
7. Air Baffle 7. (Optional) LO100i 10/100 Mbps LAN port for IPMI
management (RJ-45)
8. PCI Cage
9. System Board 8. LAN Port
9. LAN Port
10. 2 Rear USB 2.0 Ports
11. VGA Port
12. Serial Port
What's New
Support for HP 3TB 3G SATA 7.2K 3.5in MidlLine Hard Drive
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Overview
DA - 13248 North America — Version 53 — September 24, 2012 Page 1

HP ProLiant DL180 Generation 6 (G6) Specifications

General

Storage	Up to 12 LFF or 25 SFF drives
Form Factor	2U Rack
Chipset	Intel 5520 Chipset
Processor	Intel Xeon 5500 and 5600 series
Network	Embedded NC382i Dual Port Gigabit Ethernet
Power Supply	Dual 460W or 750W hot-plug power supplies
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
RAID	Integrated HP Smart Array P410 Controller (RAID 0/1/1+0/5) with optional battery-backed write cache (BBWC) or Flash-Backed Write Cache (FBWC). Optional HP Smart Array P212 Controller (RAID 0/1/1+0)

Summary

Standard Features

Memory Information

Information on memory types and capacity.

Storage Controller Options

Information on HP Smart Array controllers.

Maximum Internal Storage

Supported Operating Systems

Pre-configured Models

Four Drive SATA Models

Eight Drive SATA Models

Twelve Drive SATA Models

Twenty Five Drive SAS Models

Configuration Information - Factory Integrated Models

Step 1: Base Configuration

Base server chassis options for factory integration.

Step 2: Choose Required Options

Selecting core components for factory integration.

Core Options

Processor Options

Detailed processor options for the server.

Hard Drive Options

Details on various hard drive configurations.

Memory

Standard Memory Configurations

Maximum Memory Support

DDR3 Memory Population Guidelines

Rules for installing DDR3 memory modules.

Storage

Drive Support Overview

SATA Hot Plug SFF Drive Options

SAS Hot Plug SFF Drive Options

Power Specifications

460W Gold Hot Plug Power Supply

750W Gold Hot Plug Power Supply

1200W -48VDC Hot Plug Power Supply

Technical Specifications

Power Input Requirements

Smart Array Controller Details

Technical specifications for Smart Array controllers.