HP ProLiant DL180 Generation 6 (G6) - Maximum Internal Storage

Maximum Internal
Storage
One of the following
depending on Model
Hot Plug 3.5" SATA 42.0TB (14 x 3TB)
Hot Plug 3.5" SAS 42.0TB (14 x 3TB)
Hot Plug 2.5" SATA 25.0TB (25 x 1.0TB)
Hot Plug 2.5" SATA SSD 10.0TB (25 x 400GB)
Hot Plug 3.5" SATA SSD 5.6TB (14 x 400GB)
Hot Plug 2.5" SAS 25.0TB (25 x 1.0TB)
Hot Plug 2.5" SAS SSD 20.0TB (25 x 800GB)
Interfaces Network RJ-45 (Ethernet) 2 10/100/1000 NIC ports (plus 1 dedicated for the HP ProLiant Lights Out 100i
Remote Management)
Serial 1
Graphics 1
USB 5 total ports: (2) front, (2) rear, (1) optional internal
NOTE: In order to connect a USB device internally, the internal USB Cable G6
Kit must be used (P/N 536769-B21).
Industry Standard
Compliance
ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0 Compliant
Server Power Cords One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (P/N 163719-002) that
allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected
to PDU's in data center racks so they now ship standard with a PDU power cord (416151-B21). If a user
wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the NEMA power cord must be
ordered separately.
If customers require a power cord, they can check the power cord matrix for the appropriate cord. Please
see the following power cord matrix: http://www.hp.com/go/powercordmatrix
NOTE: Rack models ship standard with an IEC cable.
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Standard Features
DA - 13248 North America — Version 53 — September 24, 2012 Page 5