HP HPE ProLiant DL180 Gen10 User Manual

Specification Value
Rated steady-state power
800 W at 200 VAC to 240 VAC input
800 W at 240 VDC input for China only
Maximum peak power
800 W at 200 VAC to 240 VAC input
800 W at 240 VDC input for China only
HPE 800W Flex Slot Universal Hot-plug Low Halogen Power Supply
Specification Value
Input requirements —
Rated input voltage
200 VAC to 277 VAC
380 VDC
Rated input frequency 50 Hz to 60 Hz
Rated input current
4.4 A at 200 VAC
3.1 A at 277 VAC
2.3 A at 380 VDC
Maximum rated input power
869 W at 200 VAC
865 W at 230 VAC
861 W at 277 VAC
863 W at 380 VDC
BTUs per hour
2964 at 200 VAC
2951 at 230 VAC
2936 at 277 VAC
2943 at 380 VDC
Power supply output —
Rated steady-state power
800 W at 200 VAC to 277 VAC input
Maximum peak power
800 W at 200 VAC to 277 VAC input
HPE 1600W Flex Slot Platinum Hot-plug Low Halogen Power Supply
Specification Value
Input requirements
Rated input voltage
200 VAC to 240 VAC
240 VDC for China only
Table Continued
152 Specifications

HP HPE ProLiant DL180 Gen10 Specifications

General

Processor Sockets	2
Memory Slots	16 DIMM slots
Expansion Slots	Up to 6 PCIe 3.0 slots
Form Factor	2U Rack
Management	HPE iLO 5
Processor	Intel Xeon Scalable processors
Storage	Up to 12 LFF or 24 SFF drives
RAID Support	HPE Smart Array S100i SR Gen10
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Network Controller	Optional FlexibleLOM or stand-up card