EasyManua.ls Logo

HP ProLiant DL160 G5P User Manual

HP ProLiant DL160 G5P
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HP ProLiant DL160 G5p Server
Maintenance and Service Guide
Part number 498333-001
First edition September 2008

Table of Contents

Other manuals for HP ProLiant DL160 G5P

Question and Answer IconNeed help?

Do you have a question about the HP ProLiant DL160 G5P and is the answer not in the manual?

HP ProLiant DL160 G5P Specifications

General IconGeneral
Processor SocketLGA 771
Memory Slots8 DIMM slots
NetworkDual Gigabit Ethernet
Form Factor1U Rack
ManagementIntegrated Lights-Out 2 (iLO 2)
Operating System SupportMicrosoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server
ProcessorIntel Xeon 5400 series
ChipsetIntel 5000P
MemoryUp to 32GB DDR2
StorageUp to 4 x 3.5" SAS or SATA hard drives
Power Supply750W hot-plug power supply

Summary

Connectors, Switches, and LEDs

Removal and replacement procedures

Pre-Installation procedure

Outlines the necessary steps to perform before opening or servicing the server.

Powering down the server

Describes the complete procedure to shut down the server and remove all power.

Hard drives

Instructions for installing and removing SAS or SATA hard drives in the server bays.

System board removal and replacement procedure

Step-by-step instructions for removing and reinstalling the server's system board.

Diagnostic tools and setup utilities

BIOS setup utility

Explains how to use the BIOS Setup Utility to configure server settings.

Power-On Self-Test (POST)

Describes the POST process for testing and initializing system components during startup.

Customer self repair

Related product manuals