Removal and replacement procedures 69
Figure 55 Installing the PCI card
To reinstall the PCI cage:
1. Installing the PCI riser card into the system.
a. Align the PCI card with the open expansion slot.
b. Press the PCI card straight down into the expansion slot on the system board.
2. Align the PCI cage to the system board expansion slot, and then press it down to ensure full
connection to the system board.
3. Tighten the two captive screws to secure the PCI cage to the chassis.
Figure 56 Reinstalling the PCI cage with PCI card
To Next Page
Loading...
