Removal and replacement procedures 48
Hard drives
The drive bays on the front panel can accommodate up to two, four or eight hard drives. You can
install either SAS hard drives or SATA hard drives in the server.
For servers with 2 3.5-inch HDDs, the hard drives installed in the server are labeled from Device 1 to
Device 2, from left to right, when viewed from the front of the server.
Figure 12 Hard Drive Configuration / 2 3.5” HDD Hot-plug Model
Item Description
1-2 SAS/SATA hard drives 1-2
For servers with 4 3.5-inch HDDs, the hard drives installed in the server are labeled from Device 1 to
Device 4, from left to right, when viewed from the front of the server.
To Next Page
Loading...
