Removal and replacement procedures 68
3.
Be sure the tool is oriented correctly. Align the processor installation tool with the socket, and
then install the processor. THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY
DAMAGED.
Figure 46 Installing the processor
CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. To avoid
damage to the system board:
•
Never install or remove a processor without using the processor installation tool.
• Do not touch the processor socket contacts.
• Do not tilt or slide the processor when lowering the processor into the socket.
4. Press and hold the tabs on the processor installation tool to separate it from the processor, and
then remove the tool.
To Next Page
Loading...
