Removal and replacement procedures 76
Figure 58 PCIe x16 Riser Card Connector Location
• Single-slot PCIe riser card (x16 link with x16 slot)
Figure 59 PCIe x8 Riser Card Connector Location
• Single-slot PCIe riser card (x4 link with x8 slot)
PCI cage
To remove the PCI cage:
NOTE: Disconnect all cables connecting an existing expansion board to the system board.
1. Loosen the four screws that secure the PCI cage to the chassis.
2. Lift the PCI cage away from the system.
To Next Page
Loading...
