this document.
NOTE:
For more information on ProLiant Energy Efficient Features, see:
www.hp.com/go/proliant-energy-efficient
.
NOTE:
PC3L is a low voltage memory.
NOTE:
Not all Intel E5 processor series support 1600MHz or 1333MHz speeds. Memory
speed is a function of the processor QPI speed.
HP Power Supplies
NOTE:
Prior to making a power supply selection it is highly recommended that the HP
Power Advisor is run to determine the right size power supply for your server
configuration. The HP Power Advisor is located at:
www.hp.com/go/hppoweradvisor
.
NOTE:
HP ProLiant DL160 Gen8 has only one power supply slot, above mentioned
power supplies will not be Hot Plug for DL160 Gen8.
HP 500W Platinum Factory Integrated Power Supply Kit with Backplane
NOTE:
Since this power supply is not common slot it does not allow iPDU to obtain HP
Location Discovery Services information. iLO Advanced Pack is required for Discovery
Services in DL160 Gen8.
656365-B21
HP Common Slot Platinum Plus Power Supply Kits
NOTE:
The following Power Supplies offer 94% Efficiency with support for Intelligent
Power Discovery.
NOTE:
Common slot power supplies need an enablement kit(P/N: 662959-B21) in
DL160 Gen8.
HP 460W Common Slot Platinum Plus Hot Plug Power Supply Kit
NOTE:
Requires Power Backplane kit (p/n: 662959-B21).
656362-B21
HP 750W Common Slot Platinum Plus Hot Plug Power Supply Kit
NOTE:
Requires Power Backplane kit (p/n: 662959-B21).
656363-B21
HP Common Slot -48VDC Power Supplies
HP 750W Common Slot -48VDC Hot Plug Power Supply Kit
NOTE:
Requires Power Backplane kit (p/n: 662959-B21).
636673-B21
NOTE:
The HP 750W Common Slot -48VDC power supply does not ship with a power
cable. It has been designed with a terminal block connection allowing for custom design
of power cords by the user.
NOTE:
Option Kits for AC power supplies include the power supply and one PDU IEC
cable.
NOTE:
HP ProLiant servers ship with an IEC-IEC power cord used for rack mounting with
Power Distribution Units (PDUs). For a full list of optional HP power cords please go to
www.hp.com/products/powercords
NOTE:
Power Specification and Technical Content for supported power supplies can be
found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
Enablement Kit
HP DL160 Gen8 FIO Power Backplane Kit
NOTE:
When configuring the HP ProLiant DL160 Gen8 with a Common Slot power
supply, the HP Power Backplane DL160 Gen8 FIO Kit (PN 662959-B21) must be used for
proper installation. The Common Slot power supply and power backplane kit for the
DL160 Gen8 must be factory installed and cannot be purchased as separate options.
662959-B21
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
DA - 14282 Worldwide — Version 22 — December 13, 2013
Page 23
To Next Page
Loading...
