NOTE:
Common Slot power supply is mandatory with 10Gigabit FlexibleLOM.
NOTE:
Power Specification and Technical Content for supported power supplies can be
found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
Step 3: Choose Additional Factory Integratable Options
HP Insight Software
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server
FIO License
C6N36A
Converged Infrastructure
Management Software
HP OneView with iLO Advanced - Server hardware required on same purchase order
HP OneView for ProLiant DL Server incl 3yr 24x7 Supp FIO Bundle Physical 1 Svr Lic
E5Y43A
HP OneView incl 3yr 24x7 Supp Bundle 1 Svr E-LTU
E5Y43AAE
HP Optical Drives
HP 9.5mm SATA DVD-ROM JackBlack Optical Drive
652238-B21
HP 9.5mm SATA DVD-RW JackBlack Optical Drive
652241-B21
HP USB and SD Options
HP Gen8 FIO Internal USB Kit
NOTE:
Required to enable the internal USB port.
662961-B21
HP Rack Options
HP 1U FIO Friction Rail Kit
NOTE:
Includes Rack Mounting Gen8 non-telescoping Friction Rail Kit which does not
allow for in rack serviceability. The HP 1U Gen8 Cable Management Arm is not available
when using Friction Rails. Caution: HP recommends that a minimum of two people is
required for all Rack Server installations. Please refer to your installation instructions
for proper tools and number of people to use for any installation.
663200-B21
NOTE:
Additional Rack Options can be found in the "Additional Options" section of this
QuickSpecs.
Step 4: Choose Additional Options for Factory Integration
NOTE:
For additional "Core Options" and "Additional Options", please refer to the "Options" section below.
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
DA - 14282 Worldwide — Version 22 — December 13, 2013
Page 24
To Next Page
Loading...
