HP ProLiant DL320e - Memory Options

measured in accordance with ISO 7779 (ECMA 74) and declared in accordance
with ISO 9296 (ECMA 109).
Idle
LWAd 4.8 B (Base Model)
4.9 B (Performance Model)
LpAm 32 dBA (Base Model)
33 dBA (Performance Model)
Operating
LWAd 4.8 B (Base Model)
5.1 B (Performance Model)
LpAm 32 dBA (Base Model)
35 dBA (Performance Model)
NOTE: The Listed sound levels apply to standard shipping configurations.
Additional options may result in increased sound levels
NOTE: Values are subject to change without notification and are for reference
only.
NOTE: Performance of system, options, and ancillary equipment will vary
depending on the system configuration.
NOTE: Levels presented do not account for non-Hewlett-Packard installed
hardware.
Emissions Classification
(EMC)
FCC Rating Class A
Normative Standards CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15;
ICES-003; CNS13438; GB9254; K22;K24; EN
61000-3-2; EN 61000-3-3; EN 60950-1; IEC
60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family of
products is eligible to bear the appropriate compliance logos and statements.
HP Dynamic Smart Array
B120i Controller
Dimensions Embedded
Disk Drive Interface -
Transfer rate
Up to 6Gb/s SATA (Serial ATA)
SATA Connectors 6 internal SATA connectors
Server Interface x4 PCIe 2.0
SATA Speed 6Gb/s SATA links
Cache Memory Zero Memory RAID has no cache memory
Logical Drives Supported Up to 8 logical volumes (6 physical drives)
Host Memory Addressing 64-bit, supporting greater than 4GB server memory space
Hot Plug Support Yes
RAID Support RAID 0 (Striping), RAID 1 (Mirroring)
RAID 1+0 (Striping & Mirroring)
QuickSpecs
HP ProLiant DL320e Generation 8 (Gen8) v2
Technical Specifications
DA - 14563 North America — Version 8 — December 13, 2013 Page 44