Removal and replacement procedures 43
7.
Remove the HP Systems Insight Display and LED assembly.
To replace the component, reverse the removal procedure.
DIMMs
To remove the component:
1. Power down the server (on page 24).
2. Extend the server from the rack (on page 25).
3. Remove the access panel ("Access panel" on page 27).
4. Remove the BBWC battery pack, if installed ("BBWC battery pack" on page 36).
5. Remove the air baffle ("Air baffle" on page 37).
6. Remove the DIMM.
To replace the component, reverse the removal procedure.
To Next Page
Loading...
