Removal and replacement procedures 52
13.
Remove the optional hard drive backplane ("Optional hard drive backplane assembly (top)" on
page 41).
14. Remove the hard drive backplane ("Standard hard drive backplane assembly (bottom)" on page
41).
15. Remove all DIMMs ("DIMMs" on page 43).
16. Remove the heatsink ("Heatsink" on page 44).
17. Open the processor retaining latch and the processor socket retaining bracket.
CAUTION: To avoid damage to the processor:
• Handle the processor only by the edges.
• Do not touch the bottom of the processor, especially the contact area.
18. Using your fingers, remove the processor from the failed system board.
To Next Page
Loading...
