HP ProLiant DL360 G6 - Page 66

Component identification 66
Front panel LEDs and buttons
Item Description Status
1 UID LED/button Blue = Identification is activated.
Flashing blue = System is being managed remotely.
Off = Identification is deactivated.
2 Health LED Green = System health is normal.
Amber = System health is degraded. To identify the component in
a degraded state, see "HP Systems Insight Display and LEDs ("HP
Systems Insight Display LEDs" on page 72)".
Red = System health is critical. To identify the component in a
critical state, see "HP Systems Insight Display and LEDs ("HP
Systems Insight Display LEDs" on page 72)".
Off = System health is normal (when in standby mode).
3 NIC 1 link/activity LED Green = Network link exists.
Flashing green = Network link and activity exist.
Off = No link to network exists.
If power is off, the front panel LED is not active. For status, view
the RJ-45 connector LEDs ("Rear panel LEDs and buttons" on page
68).
4 NIC 2 link/activity LED Green = Network link exists.
Flashing green = Network link and activity exist.
Off = No link to network exists.
If power is off, the front panel LED is not active. For status, view
the RJ-45 connector LEDs ("Rear panel LEDs and buttons" on page
68).