HP ProLiant DL360 G6 - Page 53

Hardware options installation 53
4.
Remove the hard drives from bays 1 and 2.
5. Remove the hard drive bezel blanks from hard drive bays 5 and 6 ("Removing hard drive bezel
blanks" on page 47).
6. Remove the dual hard drive bezel blank ("Removing the dual hard drive bezel blank" on page 48).
7. Install the hard drive cage.
8. Remove the BBWC battery pack, if installed ("Remove the BBWC battery pack" on page 22).
9. Remove the air baffle (on page 23).
10. Remove the fan blank.