Removal and replacement procedures 32
7.
Remove the HP Systems Insight Display and LED assembly.
To replace the component, reverse the removal procedure.
DIMMs
To remove the component:
1. Power down the server (on page 13).
2. Extend the server from the rack (on page 14).
3. Remove the access panel ("Access panel" on page 16).
4. If installed, remove the BBWC battery pack or the FBWC capacitor pack ("BBWC battery pack or
FBWC capacitor pack" on page 25).
5. Remove the air baffle ("Air baffle" on page 26).
6. Remove the DIMM.
To Next Page
Loading...
