What to do if amber LED blinks regularly on HP Server hard drives?
If the amber LED on your HP Server's hard drives is blinking regularly, it indicates a problem. The suggested solution is to replace the HDD.
What to do if the hardware LED indicates a problem on HP ProLiant DL360 G7 Server NIC?
If the hardware LED on the NIC of your HP Server indicates a problem, check the NIC indicator LEDs. If the problem continues, consider ordering a replacement NIC.
What to do if the hardware LED indicates a problem on HP ProLiant DL360 G7 fan?
If the hardware LED on the fan of your HP Server indicates a problem, and the issue persists, it is recommended to order a replacement fan.
What to do if the hardware LED indicates a problem on HP ProLiant DL360 G7 memory DIMM?
If the hardware LED on the memory DIMM of your HP Server indicates a problem, and the issue persists, it is recommended to order replacement memory.
What to do if the hardware LED indicates a problem on HP ProLiant DL360 G7 DVD-RW drive?
If the hardware LED on the DVD-RW drive of your HP Server indicates a problem, perform Steps 3 and 4 in the System does not boot from the drive section. Also, perform all the steps in the Data read from the drive is inconsistent, or drive cannot read data and Drive is not detected sections. If the problem continues, it's recommended to order a replacement drive.
General| Storage | Up to 8 SFF SAS/SATA/SSD drives |
|---|---|
| Form Factor | 1U Rack |
| Processor | Intel Xeon 5600 series |
| Memory | Up to 192GB DDR3 |
| Network | Embedded NC382i Dual Port Multifunction Gigabit Server Adapter |
| Power Supply | Hot-plug redundant power supplies (460W, 750W, or 1200W) |
| Expansion Slots | 2 x PCIe Gen2 |
| RAID Controller | HP Smart Array P410i |
| Network Controller | HP NC382i Dual Port Multifunction Gigabit Server Adapter |
| Management | Integrated Lights-Out 3 (iLO 3) |
| Operating System Support | Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware |
To Next Page