HP ProLiant DL360 G7 - Replacing Internal Components

No. Task Reference Avaya recommendation
• DL360G7 SRVR
146GB 10K SAS
2.5” HDD
• DL360G7 SRVR
146GB 15K SAS
2.5” HDD
• DL360G7 SRVR
300GB 10K SAS
2.5” HDD
MSG: Removal and
replacement
procedures > SAS and
SATA hard drive
MSG: Removal and
replacement
procedures > Hard
drive blank
• DL360G7 SRVR
PWR SUP 460W
HE
• DL360G7 SRVR
AC PWR SUP
750W
• DL360G7 SRVR
DC PWR SUP
1200W
MSG: Removal and
replacement
procedures > Hotplug
power supply
MSG: Removal and
replacement
procedures > Power
supply blank
Ensure that the
replacement power supply
matches the specifications
of the defective power
supply.
4 Slide the server into
the rack (if
necessary)
UG: Installing the
server into the rack
Check that the Cable
Management Arm (if
present) moves freely out
of the way of rear panel
components.
5 Connect the power
cable(s) to the power
supply (if necessary)
UG: Powering up and
configuring the server
6 Power up the server
(if necessary)
UG: Power up the
server
Replacing internal components
Use the checklist below to replace any of these internal server components:
Part number
Description
700501424 DL360G7 DVD-RW DRIVE W/ BRKT
700501322 DL360G7 SRVR DUAL PORT 1GB NIC
700501425 DL360G7 SRVR FAN FRU
Replacing internal components
Maintaining and Troubleshooting the HP ProLiant DL360 G7 Server November 2010 17