HP ProLiant DL360 G7 - SAS and SATA Hard Drive LEDs; Fan Modules

Replacing external components
Use the checklist below to replace any of the following external server components:
Part number Description Hot-swappable?
700501426 DL360G7 SRVR 146GB 10K
SAS 2.5” HDD drive
Y
700501249 DL360G7 SRVR 146GB 15K
SAS 2.5” HDD
Y
700501314 DL360G7 SRVR 300GB 10K
SAS 2.5” HDD
Y
700501182 DL360G7 SRVR PWR SUP
460W HE
Y, if redundant
700501312 DL360G7 SRVR AC PWR
SUP 750W
Y, if redundant
700501313 DL360G7 SRVR DC PWR
SUP 1200W
Y, if redundant
Note:
Hard disk drives and redundant power supplies are hot-swappable; you do not have to power
down the server. Replacing a power supply usually does not require removing the server
from the rack unless cables or other obstructions prevent removing and replacing the power
supply.
No.
Task Reference Avaya recommendation
1 Power down server
(if necessary)
MSG: Power down the
server
Determine whether the
replaceable component is
hot-swappable.
2 Slide the server out
of the rack (if
necessary)
MSG: Extend the
server from the rack
MSG: Remove the
server from the rack
Check that the Cable
Management Arm (if
present) moves freely out
of the way of rear panel
components.
3 Replace the
component:
Maintaining and Troubleshooting the HP DL360 G7 Server
16 Maintaining and Troubleshooting the HP ProLiant DL360 G7 Server November 2010