To Next Page

November 2015 HP ProLiant DL360 G9 RAID Configuration

HP ProLiant DL360 G9 RAID configuration

Use the following procedures to configure the Avaya HP DL360G9 Raid Controller

(P440AR) for Avaya RAID Array configurations.

A monitor and USB keyboard and mouse are required to configure the Raid Controller.

1. Connect a monitor, USB keyboard, and mouse to HP ProLiant DL360 G9 Server.

2. Power up the server.

The system displays the HP DL360G9 hardware boot screen.

Other manuals for HP ProLiant DL360 G9

Questions and Answers:

Need help?

Do you have a question about the HP ProLiant DL360 G9 and is the answer not in the manual?

General

Processor Sockets	2
Memory Slots	24 DIMM slots
Form Factor	1U Rack
Processor	Intel Xeon E5-2600 v3/v4
Storage	Supports up to 8 SFF or 4 LFF drives
Network	4 x 1GbE embedded
Power Supply	2 x Redundant Power Supplies (500W, 800W, or 1400W)
Expansion Slots	3 PCIe 3.0 slots
Management	HPE iLO Management Engine
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi
RAID Support	Smart Array P440ar/2GB FBWC (optional)