MF877-00 Page 10
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at MF877-01
10_a. Use Torx driver with T15, 5 mm socket screwdriver and 8 mm socket screwdriver to unlock screws.
10_b. Remove System board (PCA) from tray.
Remove Electrolytic Capacitors (C801: 25mm*55mm and C237, C238, C241:10mm*25mm) from power
supply HSTNS-PD40, HSTNS-PD40-1.
To Next Page
Loading...
