HP ProLiant DL380 Generation 5 Specification

NOTE: For Configure to Order requirements within EMEA region, please consult local Sales Contact.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option only available as a Factory Installable Option.
Step 1: Base Configuration (choose one of the following configurable models)
Models HP ProLiant DL380G5 Rack Chassis 391835-B21
Factory Integrated Model ships with:
(8) SFF Serial Attached SCSI (SAS) Drive Bays
Embedded Dual NC373i Multifunction Gigabit NICs
PCI-Express Riser Cage
800 Watt hot plug power supply, CE Mark Compliant
One IEC Power cord
12 hot plug fans (fully redundant)
Rack (2U), (3.5-inch)
Step 1A: Choose SAS Controller (must choose only one of the following)
SAS Controllers P400/256 for DL380 G5/ DL385 G2 FIO
NOTE: PCI Express
405160-B21
P400/512 BBWC for DL380 G5/ DL385 G2 FIO
NOTE: PCI Express
405162-B21
HP Smart Array E200/64 Controller
NOTE: PCI Express
409180-B21
HP Smart Array E200/128 BBWC Controller
NOTE: PCI Express
411508-B21
HP Smart Array P600 Controller
NOTE: PCI-X. SA-P600 Controller supports both internal and external drives.
337972-B21
QuickSpecs
HP ProLiant DL380 Generation 5
Configuration Information - Factory Integrated Models (North America only)
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006 Page 15

HP ProLiant DL380 Generation 5 Specifications

General

Processor Sockets	2
Chipset	Intel 5000P
Memory Slots	8 DIMM slots
Form Factor	2U Rack
Memory	Up to 64 GB
Storage	8 SFF SAS/SATA hot plug drive bays
RAID Support	HP Smart Array P400i/256MB Controller
Network	2 x NC373i Multifunction Gigabit Network Adapters
Power Supply	Redundant hot plug power supplies
Expansion Slots	6 PCI-Express slots
Operating System Support	Windows Server, Linux, VMware
Processor	Intel Xeon 5400/5200 series