EasyManua.ls Logo

HP ProLiant DL380e Gen8 - Page 27

HP ProLiant DL380e Gen8
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Factory Integrated Model ships with:
2 x HP Smart Socket Guides for fast processor installation.
12 DIMM slots for RDIMM, LRDIMM and UDIMM Memory installation
HP Ethernet 1Gb 4-port 366i Adapter
HP Dynamic Smart Array B120i Controller with Zero Memory (ZM)
I/O slots - 4 Slots come standard:
Slot 1 - FL/FH x4 PCIe 3.0 (x8 connector)
Slot 2 - HL/FH x8 PCIe 3.0 (x16 connector)
Slot 3 - HL/FH x8 PCIe 3.0 (x8 connector)
Slot 4 - Low Profile x4 PCIe 2.0 (x8 connector)
Additional Slots may be added via selections from the PCI Information and
Options subsection
System Fans - 4 (1 additional fans included with purchase of second processor)
Drive Cage - 25-SFF
USB - 4 Rear, 1 Front, 1 Internal, 1 SD slot
HP iLO Management Engine (standard)
NOTE:
New options are available for Rack Rail Kits; these options are no longer
standard on-board with this Model Part Number. Please see HP Rack Options below for
optional required options.
HP ProLiant DL380e Gen8 8 LFF Configure-to-order Server
NOTE:
This CTO server supports 4, 6, and 8LFF drive configurations based on the
selection of controller. The HP Dynamic Smart Array B120i is capable of controlling up
to 6 SATA drives. Greater than 4 SATA drives require the use of an option cable, p/n
675856-B21). Greater than 6 SATA drives require an HP Dynamic Smart Array B320i or
P420 or greater controller.
669255-B21
Factory Integrated Model ships with:
2 x HP Smart Socket Guides for fast processor installation.
12 DIMM slots for RDIMM, LRDIMM and UDIMM Memory installation
HP Ethernet 1Gb 4-port 366i Adapter
HP Dynamic Smart Array B120i Controller with Zero Memory (ZM)
I/O slots - 4 Slots come standard:
Slot 1 - FL/FH x4 PCIe 3.0 (x8 connector)
Slot 2 - HL/FH x8 PCIe 3.0 (x16 connector)
Slot 3 - HL/FH x8 PCIe 3.0 (x8 connector)
Slot 4 - Low Profile x4 PCIe 2.0 (x8 connector)
Additional Slots may be added via selections from the PCI Information and
Options subsection
System Fans - 4 (one additional fan included with purchase of second processor)
Drive Cage - 8-LFF (Optical media drive optional)
USB - 4 Rear, 2 Front, 1 Internal, 1 SD slot
HP iLO Management Engine (standard)
NOTE:
New options are available for Rack Rail Kits; these options are no longer
standard on-board with this Model Part Number. Please see HP Rack Options below for
optional required options.
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
DA - 14328 Worldwide — Version 27 — December 16, 2013
Page 27

Other manuals for HP ProLiant DL380e Gen8

Related product manuals