6. Configure the Network Interface Information for both NICs. Click
Next to continue.
7. Configure the System Information. Click Next to continue.
8. Verify that the information is correct when the configuration review
window is displayed (see Figure 2).
Figure 2 Rapid Startup configuration review window
9. Click Finish to exit Rapid Startup. If a reboot is required, Rapid
Startup displays a message that a reboot is occurring and that the
configuration information will be set.
The browser returns to the status window. The refresh can take several
minutesifthedevicewasrestarted.
NOTE:
After the Rap id Startup Wizard is complete, the Welcome
window becomes the default page.
Completing the system configuration
The basic configuration for the HP ProLiant Storage Server is complete at
this point, however, some computing environments can require additional
settings and configuration.
HPProLiantStorageServeruserguide
27
To Next Page
Loading...
