Removal and replacement procedures 37
2.
Remove the heatsink protective cover.
3. Install the heatsink.
4. Install the processor memory drawer cover.
5. Install the processor memory drawer.
6. Power up the server.
Processor on the primary processor memory board
The processors and memory are stored in a module at the front of the server. Access to the processor
memory module is provided through the front panel, eliminating the need to extend the server from the
rack to install new or replace existing processors or upgrade the memory.
WARNING: Use caution when installing the processor memory module or removing the
processor memory module. The processor memory module is very heavy when fully
populated.
To Next Page
Loading...
