HP ProLiant ML10 Specification

The HP ProLiant ML10 Server is a single-socket 4U tower server, delivering excellent value in a large form factor that small businesses
require to run a small network environment. It is outstanding for businesses looking for improved performance, number of available
slots, and flexible storage options while staying within a tight budget.
Front View: Rear View:
1. Drive Bay 1. Power Supply Connector
2. USB Connectors 2. Slot 1 PCIe
3. NIC Status LED 3. Slot 2 PCIe
4. Drive Status LED 4. Slot 3 PCIe
5. System Power Button/LED 5. Slot 4 PCIe
6. LFF Drive 6. USB Connector
7. DIMM 7. NIC Connector
8. CPU Fan 8. Video Connector
9. System Fan
10. PCIe2x16 (8,4,1) Slot
11. Power Supply
12. Access Panel
What's New
Supports up to 4 large form factor SATA drives
Allows businesses to increase local storage as needed
Provides low cost, reliable data storage solution
QuickSpecs
HP ProLiant ML10 Server
Overview
DA - 14605 Worldwide — Version 6 — October 25, 2013 Page 1

HP ProLiant ML10 Specifications

General

Memory Slots	4
Form Factor	Tower
Processor	Intel Xeon E3-1200 v3
Memory	Up to 32 GB
Drive Bays	4 LFF
Power Supply	300W
Chipset	Intel C222
Expansion Slots	1 PCIe 3.0 x16, 1 PCIe 2.0 x1
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi
RAID Support	Integrated SATA RAID controller (Intel Rapid Storage Controller); optional HP Smart Array controllers