HP ProLiant ML150 Gen9 User Manual

HPE ProLiant ML150 Gen9 Server
Maintenance and Service Guide
Abstract
This guide describes identification and maintenance procedures, diagnostic tools, specifications and requirements for hardware
components and software. This guide is for an
experienced service technician. Hewlett Packard Enterprise assumes that you are qualified
in the servicing of computer equipment, trained in recognizing hazards in products, and are familiar with weight and stability precautions.
Part Number: 781742-004R
N
ovember 2015
Edition: 5

HP ProLiant ML150 Gen9 Specifications

General

Processor Sockets	2
Memory Slots	16 DIMM slots
Processor	Intel Xeon E5-2600 v3/v4
Storage	Up to 8 LFF SAS/SATA or 16 SFF SAS/SATA
RAID Support	HP Dynamic Smart Array B140i
Network	2 x 1GbE ports
Power Supply	550W or 900W AC power supply
Form Factor	Tower (5U)
Operating System Support	Windows Server, Linux, VMware

Summary

Removal and Replacement Procedures

Safety Considerations

Review all safety information before performing service procedures, focusing on static discharge and equipment symbols.

Preparation Procedures

Steps required before accessing components, including removing bezel, powering down, and disconnecting power.

Storage Drive

Procedures for removing and replacing hot-plug drive blanks and hot-plug drives.

Processor

Detailed instructions for removing and installing the server processor, including thermal management.

HPE 550 W Power Supply

Step-by-step guide for removing and replacing the 550-watt power supply unit.

Diagnostic Tools

HPE UEFI System Utilities

Overview of UEFI System Utilities for system configuration, diagnostics, and management.

HPE Insight Diagnostics

Information on the proactive server management tool for diagnostics and troubleshooting.

Active Health System

Features of the Active Health System for continuous monitoring and diagnosing server issues.

Component Identification

System Board Components

Detailed diagram and list of components found on the system board.

Drive Numbering

Explanation of how drive bays are numbered for different drive configurations.

Cabling

Storage Cabling

Diagrams illustrating the connection of hot-plug SFF and LFF drive cages.

Power Cabling

Instructions for connecting power supplies and system board power cables.

Specifications

Server Specifications

Key physical dimensions, weight, and configuration details of the server.

Power Supply Specifications

Information on available power supply units and their specifications.