Do you have a question about the HP ProLiant ML150 Generation 2 and is the answer not in the manual?
Processor Sockets | 2 |
---|---|
Form Factor | Tower |
Operating System Support | Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server |
CPU | Intel Xeon processor |
Memory Slots | 6 |
Storage | Serial ATA (SATA) or Serial Attached SCSI (SAS) depending on configuration |
Expansion Slots | 6 |
Visual representation of server components with numbered parts.
Guidelines for handling components, ESD, and powering down the server.
Procedures for removing the bezel door and access panel of the server chassis.
Illustrations showing proper routing for various internal server cables.
Procedures for removing and replacing front and rear system fan modules.
Information on drive bay layouts and server boot order settings.
Steps for removing and replacing diskette, CD-ROM, SCSI, and SATA drives.
Details on expansion slot types and procedures for replacing expansion boards.
Guidelines and steps for installing and replacing memory modules.
Instructions for removing and installing processors and their associated heatsinks.
Procedures for removing the system board and replacing the system battery.
Steps for removing/replacing the power supply and detaching chassis stands.
Overview of Power-On Self-Test (POST) and common error messages.
How to access, navigate, and configure BIOS settings.
Steps for creating a BIOS update diskette and updating the server BIOS.
Using SCSISelect for configuration, disk utilities, and disaster recovery.
Using Adaptec RAID, ACU, initializing drives, and managing arrays.
Introduction to server connectors, jumpers, and LEDs.
Detailed identification of components on the rear panel and system board.
Information on jumpers, their settings, and clearing system configuration.
Explains power, system status, drive, and network interface LEDs.
Dimensions, weight, power, and environmental specs for the system unit.
Specs for memory, diskette, CD-ROM, SCSI, SATA drives, and LOM.