HP ProLiant ML10 - System maintenance switch; NMI functionality

SATA Model
NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section
of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped
separately.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
NOTE: For general information about HP Smart Array B110i SATA RAID Controller, please visit:
http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/smartarrayb110i/index.html
Entry Model
HP ProLiant ML10 G2130
1P 2GB-U B110i 300W PS
Entry Server
730651-xx1
Processor (1) Intel® Pentium® Processor G2130 (3.20GHz/2-core/3MB/55W, 1600)
Processor
Cache Memory 3MB Intel® Smart Cache
Memory 2GB (1x2GB) PC3-12800E (DDR3-1600) Unbuffered DIMM
32GB Maximum memory capacity
NOTE: Total 4 DIMM slots.
Network Controller HP NC112i 1-Port Ethernet Server Adapter (x1)
Storage Controller HP Embedded Smart Array B110i SATA RAID Controller
Hard Drive None ships standard (Single LFF carrier included)
Optical Drive HP Half-Height SATA DVD ROM JackBlack Optical Drive (Optional)
HP Half-Height SATA DVD RW JackBlack Optical Drive (Optional)
Power Supply 300 Watts 80+ Bronze Non-Hot Plug, Non redundant Power Supply
Fans One (1) - Non-redundant system fan ships standard
One (1) - Non-redundant CPU heatsink fan ships standard
Accessories Keyboard/mouse optional
Management HP Integrated Lights-Out Standard (iLO 3)
Form Factor Micro ATX Tower (4U)
Warranty Server Warranty includes 1 year parts, 1 year labor, 1-year on-site support
with next business day response.
Country Code Key xx= 00 US
xx=42 Europe
QuickSpecs
HP ProLiant ML10 Server
Pre-configured Models
DA - 14605 Worldwide — Version 6 — October 25, 2013 Page 10