Internal Storage Devices
Optical Drive
HP Half-Height SATA DVD (Optional)
Standard Hard Drive
(1) Non hot-plug LFF SATA
Hard Drive Bay
Configurations (depending
on option)
2 HDDs (no optical)
Convert optical bay to 2nd LFF HDD bay
NOTE:
Requires purchase of HP ML10 Hard Drive Enablement Kit (#730641-
B21)
3 HDDs (with optical)
Replace internal single HDD carrier with a 3 x LFF carrier (leaving optical bay
available)
NOTE:
Requires purchase of HP ML10-4 LFF Hard Drive Enablement Kit
(#742971-B21)
4 HDDs (no optical)
Replace internal single HDD carrier with a 3 x LFF carrier and convert optical
bay to support 1 x LFF HDD
NOTE:
Requires purchase of HP ML10-4 LFF Hard Drive Enablement Kit
(#742971-B21)
Maximum Internal Storage
Non-Hot Plug LFF SATA
8TB
4 x 2TB
NOTE:
Requires purchase of optional HP ML10-4 LFF Hard Drive Enablement Kit (#742971-B21)
Interfaces
Video Port
1
USB 2.0 Ports
7 total (4 rear, 2 front panel, 1 internal)
Network RJ-45 (Ethernet)
1 dedicated for HP Integrated Lights-Out)
iLO Remote
1 Gb Dedicated
Industry Standard
Compliance
ACPI V3.0b Compliant
PCI Express Rev 2.0
PXE Support
WOL Support
IPMI 2.0 compliance
DCMI 1.0
Microsoft® Logo certifications
Red Hat Enterprise Linux Logo certifications
SUSE Linux Enterprise Server Logo certifications
USB 2.0
Server Power Cords
The ML10 server ships standard with a 6 country specific NEMA power cord. If customers require a local
power cord, they can check the power cord matrix for the appropriate country specific sku. Please see the
following power cord matrix:
http://www.hp.com/go/powercordmatrix
Power Supply
300 Watts 80+ Bronze Non-Hot Plug, Non redundant Power Supply
QuickSpecs
HP ProLiant ML10 Server
Standard Features
DA - 14605 Worldwide — Version 6 — October 25, 2013
Page 4
To Next Page
Loading...
