EasyManua.ls Logo

HP ProLiant ML110 Generation 5 - Electrostatic discharge information; Pre-installation procedure

HP ProLiant ML110 Generation 5
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Simultaneous Drive
Transfer Ports
1 x4 Wide SAS Connectors
Port Transfer Rate
12 Gb/s per x4 Wide SAS Port (4 x 3 Gb/s)
Software upgradeable
Firmware
Yes
Maximum Capacity
1.2TB (4 x 300GB)
Memory Addressing
64-bit, supporting servers memory greater than 4 GB
Logical Drives
Supported
Up to 2 Logical Volumes
Up to 10 drives total in all RAID volumes
Up to 2 Drives per RAID 1
Up to 4 Drives per RAID 0
RAID Support
RAID 1 (Mirroring)
RAID 0 (Striping)
Upgradeable Firmware
4-MB flashable ROM
Disk Drive and
Enclosure Protocol
Support
3 Gbps SAS and 1.5 Gbps SATA
HP SC40Ge SAS Host
Bus Adapter with RAID
RAID Support
RAID 1 (Mirroring)
RAID 0 (Striping)
Logical Drives
Supported
Up to 2 Logical Volumes
Up to 10 drives total in all RAID volumes
Up to 2 Drives per RAID 1
Up to 8 Drives per RAID 0
Maximum Capacity
3.6TB (8 x 450GB)
Data Transfer Method
PCI-Express x8 - 2 GB/s maximum bandwidth
Port Transfer Rate
12 Gb/s per x4 Wide SAS Port (4 x 3 Gb/s)
Simultaneous Drive
Transfer Ports
2 x4 Wide SAS Connectors
Protocols
3 Gbps SAS and 1.5 Gbps SATA
1.5 Gbps SATA (Serial Advanced Technology Attachment)
External SAS
Connectors
None
Internal SAS
Connectors
2 internal SFF8484 x4 SAS Connectors
Upgradeable Firmware
4MB flashable ROM
QuickSpecs
HP ProLiant ML110 Generation 5
Technical Specifications
DA - 12867 U.S. QuickSpecs — Version 25 — 9-28-2009
Page 28

Other manuals for HP ProLiant ML110 Generation 5

Related product manuals