HP ProLiant ML110 Quickspecs

Maximum Storage Capacity – SATA/SAS Models
Internal SATA 640GB (4x160 GB (BTO)
2TB (4 x 500 GB (CTO)
SAS 1.2TB (4x300 GB)
Tape Drives and D2D Backup System
NOTE: Installation of SCSI tape drives in a ML110 G5 model requires SCSI controller kit (PN: 412911-B21).
NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the
following:
http://h18000.www1.hp.com/products/quickspecs/division/10233.html (Worldwide)
Position
Supported Controller
Controller/HBA
Option Kit Part
Number
Internal USB Tape
Drives
DAT 40 USB
DAT 72 USB
DAT 160 USB
2 USB 2.0 port N/A
External USB Tape
Drives
DAT 40 USB
DAT 72 USB
DAT 160 USB
External USB 2.0 port N/A
Internal SAS Tape
Drives
DAT 160 SAS
2 HP SC44Ge Host Bus Adapter 416096-B21
External SAS Tape
Drives
DAT 160 SAS
External HP SC44Ge Host Bus Adapter 416096-B21
Internal SCSI Tape
Drives
DAT 40
DAT 72
DAT 160
2 HP SC11Xe Host Bus Adapter 412911-B21
External SCSI Tape
Drives
DAT 40
DAT 72
DAT 160
External HP SC11Xe Host Bus Adapter 412911-B21
HP StorageWorks D2D
Backup Systems
D2D110
D2D120
D2D130
External Embedded Network Controller N/A
QuickSpecs
HP ProLiant ML110 Generation 5
Storage
DA - 12867 Worldwide QuickSpecs — Version 10 — 4.18.2008 Page 19

HP ProLiant ML110 Specifications

General

Product Line	ProLiant
Server Type	Tower
Processor	Intel Xeon E3-1200 series
Chipset	Intel C202
Memory Slots	4
Storage	SATA Hard Drives (HDDs) or Solid State Drives (SSDs)
Drive Bays	4 LFF or 8 SFF
RAID Support	RAID 0, 1, 10
Form Factor	Tower
Management	HP iLO
Operating System Support	Windows Server, Linux, VMware
Memory	DDR3 or DDR4 ECC Unbuffered DIMMs (UDIMMs) (depending on the specific generation)