HP ProLiant ML110 Quickspecs

Power **
HP ProLiant ML110 G5 Fully
Configured
(see ** )
Fully Loaded System output Wattage
(W)
365W
Fully Loaded System Input Current
(A rms)
6A @ 100V, 3A @ 200V
Fully Loaded System Thermal (BTU-
Hr)
1915BTU
Fully Loaded System VA (Volt-Amp) 600 VA
System Leakage with all power
supplies loaded (mA)
0.45mA@120V
System Inrush Current with all power
supplies loaded (A)
<150A@ 240Vac
Power cord requirements Nema 5-15P to IEC320-C13
IEC320-C13 to IEC320-C14
**Power shown is for a fully configured system consisting of (1) CPU, (4) double-sided
DIMMs, (4) HDDs, (2) DVD-ROM, (4) PCI cards, and (1) power supply.
Power Cords (13 Cord Sets) Power Cord Part Number
Country
APD 100614-009, 100613-008, 139867-005, 187487-001 (India)
Brazil 285052-001
Australia 100661-001
Euro 100614-009
France 100614-009
Germany 100614-009
Japan 139867-005
PRC 286496-001
UK 100613-008
US, Taiwan 121565-001
QuickSpecs
HP ProLiant ML110 Generation 5
System Specifications
DA - 12867 Worldwide QuickSpecs — Version 10 — 4.18.2008 Page 21

HP ProLiant ML110 Specifications

General

Product Line	ProLiant
Server Type	Tower
Processor	Intel Xeon E3-1200 series
Chipset	Intel C202
Memory Slots	4
Storage	SATA Hard Drives (HDDs) or Solid State Drives (SSDs)
Drive Bays	4 LFF or 8 SFF
RAID Support	RAID 0, 1, 10
Form Factor	Tower
Management	HP iLO
Operating System Support	Windows Server, Linux, VMware
Memory	DDR3 or DDR4 ECC Unbuffered DIMMs (UDIMMs) (depending on the specific generation)