HP ProLiant ML110 Quickspecs

Part Number 445067-001
Spare Kit 457884-001
Operational Input Voltage Range
(Vrms)
100 to 127 and 200 to 240 V auto ranging
Frequency Range (Nominal) (Hz) 50 to 60 Hz
Nominal Input Voltage (Vrms) 100 120 200 230 240
Max Rated Output Wattage Rating 365 365 365 365 365
Nominal Input Current (A rms) 6 N/A 3 N/A N/A
Max Rated Input Wattage Rating
(Watts)
N/A N/A N/A N/A N/A
Max. Rated VA (Volt-Amp) 600 N/A N/A N/A N/A
Efficiency (%) >65% >65% >65% >65% >65%
Power Factor N/A N/A N/A N/A N/A
Leakage Current (mA) N/A <0.45mA N/A N/A N/A
Maximum Inrush Current (A peak) N/A No component
was damaged
and input fuse
shall not blow
N/A No component
was damaged
and input fuse
shall not blow
N/A
Maximum Inrush Current duration
(mS)
N/A N/A N/A N/A N/A
QuickSpecs
HP ProLiant ML110 Generation 5
Power Specifications
DA - 12867 Worldwide QuickSpecs — Version 10 — 4.18.2008 Page 20

HP ProLiant ML110 Specifications

General

Product Line	ProLiant
Server Type	Tower
Processor	Intel Xeon E3-1200 series
Chipset	Intel C202
Memory Slots	4
Storage	SATA Hard Drives (HDDs) or Solid State Drives (SSDs)
Drive Bays	4 LFF or 8 SFF
RAID Support	RAID 0, 1, 10
Form Factor	Tower
Management	HP iLO
Operating System Support	Windows Server, Linux, VMware
Memory	DDR3 or DDR4 ECC Unbuffered DIMMs (UDIMMs) (depending on the specific generation)