HP ProLiant ML110 Quickspecs

Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA
74) and declared in accordance with ISO 9296 (ECMA 109).
SATA Model
Idle
L WAd
4.2 Bels
L pAm
26 dBA
Operating
L WAd
5.1 Bels
L pAm
34 dBA
SAS Model
Idle
L WAd
5.2 Bels
L pAm
34 dBA
Operating
L WAd
5.7 Bels
L pAm
40 dBA
HP 160GB 1.5G SATA
7.2K NHP 3.5" HDD
411275-B21
160GB 7,200 rpm Capacity 160,041 MB
Height 1.0 in. (26.1 mm)
Width 4.0 in. (101.6 mm)
Interface Serial ATA
Transfer rate
synchronous
(maximum)
1.5 Gb/s
Seek time
(typical reads, including
settling)
Single track 0.9 ms
Average 9.0 ms
Full-stroke 17.8 ms
Rotational speed 7,200 rpm
Physical Configuration Bytes/Sector 512
Logical Blocks 312,581,808
Operating Temperature 41° to 131° F (5° to 55° C)
QuickSpecs
HP ProLiant ML110 Generation 5
Technical Specifications
DA - 12867 Worldwide QuickSpecs — Version 10 — 4.18.2008 Page 23

HP ProLiant ML110 Specifications

General

Product Line	ProLiant
Server Type	Tower
Processor	Intel Xeon E3-1200 series
Chipset	Intel C202
Memory Slots	4
Storage	SATA Hard Drives (HDDs) or Solid State Drives (SSDs)
Drive Bays	4 LFF or 8 SFF
RAID Support	RAID 0, 1, 10
Form Factor	Tower
Management	HP iLO
Operating System Support	Windows Server, Linux, VMware
Memory	DDR3 or DDR4 ECC Unbuffered DIMMs (UDIMMs) (depending on the specific generation)