HP ProLiant ML110 Quickspecs

Expansion Slots # Technology Bus
Width ***
Connector
Width
Bus
Number *
Device
Number **
Form Factor Notes
1 PCI (33MHZ
/3.3Volt)
32-bit N/A 0 30 Full height
slot
2 PCIe X1 X8 0 28 Full height
slot
3 PCIe X1 X8 2 28 Full length,
full height
slot
4 PCIe X8 X8 0 1 Full length,
full height
slot
*Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with
the lowest bus).
*** Indicates the number of physical electrical lanes running to a PCI-e connector.
NOTE: PCI-X Interface (PCI 32bit/33MHz compatible)
Storage Controller
One of the following
depending on Model
SATA Models Integrated 6 ports SATA controller with embedded RAID (4 ports
available for Hard Disks)
SAS Models HP SC40Ge Host Bus Adapter with RAID 0, 1 support
Storage Optical Drive SATA DVD-ROM Drive
Hard Drives SATA 160GB SATA 7200 rpm Drive
SAS 72GB SAS 15,000 rpm Drive
Maximum Internal
Storage
Type
SAS
(Not-hot plug)
1.2TB (4 x 300 GB)
SATA
(Non-hot plug)
2TB (4 x 500 GB * )
*Offered through Configure-To-Order only. See Factory Integrated Models section for more details
QuickSpecs
HP ProLiant ML110 Generation 5
Standard Features
DA - 12867 Worldwide QuickSpecs — Version 10 — 4.18.2008 Page 4

HP ProLiant ML110 Specifications

General

Product Line	ProLiant
Server Type	Tower
Processor	Intel Xeon E3-1200 series
Chipset	Intel C202
Memory Slots	4
Storage	SATA Hard Drives (HDDs) or Solid State Drives (SSDs)
Drive Bays	4 LFF or 8 SFF
RAID Support	RAID 0, 1, 10
Form Factor	Tower
Management	HP iLO
Operating System Support	Windows Server, Linux, VMware
Memory	DDR3 or DDR4 ECC Unbuffered DIMMs (UDIMMs) (depending on the specific generation)