Default b oot sequence
The BIOS supports the following default boot sequence:
1. DVD-ROM
2. HD D order as follows:
• HDD 0, 1 (for two-HDD storage servers and the ML110 G2
(Workgroup))
• HDD0,1,2(forfour-HDDstorageservers,exceptforthe
ML100 G2 (Workgroup) )
3. PXE (network boot)
Under normal circumstances, the storage servers boot up from the primary
OS logical drive.
• If the system experiences a drive failure, the drive displays an
amber disk failure LED.
• If a single drive failure occurs, it is transparent to the OS.
ThehardwareRAIDcontrolleronfour-HDDstorageserverconfigurations
sounds an audible alarm to indicate a drive failure.
HPProLiantStorageServeruserguide
47
To Next Page
Loading...
