HP Proliant ML350 Generation 3 - Front Panel LEDs and Buttons

Connectors, Switches, and LEDs
Power Button, System Status LEDs, and Unit Identification Button
The power button, system status LEDs, and Unit Identification (UID) button are located on
the front of the server.
The power button:
•
•
•
•
•
•
•
•
•
•
•
•
Powers up the server.
Places the server in standby mode.
Powers down the server.
The following system status LEDs are explained:
Power On/Standby status
NIC
External health
Internal health
UID
Hard drive status
The UID button:
Activates identification.
Deactivates identification.
Indicates activation remotely.
4-8 HP ProLiant ML350 Generation 3 Server Maintenance and Service Guide