Hardware Options Installation 55
Removable Media Device Options
Identifying Guide Screws (on page 55)
Removing the Removable Media Device Blanks
Installing Half-Height or Full-Height Media Devices
Installing a Tape Drive ("Installing a Tape Drive Option" on page 60
)
Internal Two-Bay Hot-Plug SCSI Drive Cage ("Installing the Internal Two-Bay
Hot-Plug SCSI Drive Cage Option" on page 61
)
Identifying Guide Screws
When installing drives in the removable media bay, guide screws must be
installed to make sure the drives correctly align in the drive cage. HP has
provided extra guide screws. They are located behind the side access panel of the
server. Some options use 5.25 M3 metric screws and some use HD 6-32 screws.
The metric screws supplied by HP are black.
To Next Page
Loading...
